Pigeon Stop LogoPowered by PestFixCall our Sales Team
+44 (0)1903 538 488
Monday - Friday   9am - 6pm
Your Basket
Your basket is empty.
Protected by
WelcomeInstallation ServicesInstallation GuidesSpecificationsTrade CustomersVATDeliveryReturnsPrivacyTerms and ConditionsContact Us
Search Products
Show All Products
Browse Products
Bird Stop
Pigeon Post and Wire Kits For Masonry
Pigeon Post and Wire Kits For Masonry
Pigeon Post and Wire Kits For Masonry
Pigeon Post and Wire Kits For Masonry
Click image to enlarge
  • Ideal for proofing masonry cornices, ledges, parapets, sills, balustrades and buttresses
  • All metal components made in stainless steel
  • Everything you need to complete the job in one handy kit
  • Available in 15m, 30m, 60m & 90m kit variants
  • Enough components for a double run of wire and posts set up to 65mm apart
  • For kit component list see "more information"
  • Can be used on brick, natural stone, concrete, render and reconstituted stone

Specification

Each kit contains the following:

15m Kit 30m Kit 60m Kit 90m Kit
Pigeon Wire 0.45mm 1 X 7 304 Stainless Nylon Coated 50m 100m 200m 300m
Pigeon Post 130mm Double Headed Front Row For Masonry 11 21 41 61
Pigeon Post 150mm Single Headed Second Row For Masonry 11 21 41 61
Bird Wire Grey Masonry Rivet 22 42 82 122
Pigeon Wire Standard Spring 30 60 120 180
Bird Wire Nickel Crimp 100 200 300 400
Screw Pin and Wall Plug 10 10 10 10
6.5mm Masonry Drill Bit - Straight Shank 1 1 1 1
Bird Wire Crimp Tool 1 1 1 1

Usage

This kit is intended for use on masonry substrates only. If you require post & wire to be used on other substrates then you should consider using our surface mount kit or our range of specialist brackets for gutters, steel beams and pipes or rails.

This kit provides sufficient materials for a run of front 130mm double-head posts followed by a parallel second row (max 65mm behind first row) of single-head 150mm posts.

Once the posts are seated in their 25mm nylon masonry anchor rivets the heads of the posts will be at 105mm and 125mm.

Maximum linear distance between pigeon wire posts = 1500mm (1.5m)

Pigeon wire should be spring tensioned every 1500mm (1.5m) along its run, i.e. the wire should stop at a spring on each post and start with a newly crimped section of the other side of the post.

In doing so you are spreading the load evenly across the post system and thus avoiding spring overload

Do not thread the pigeon wire through the eyelets of the post and onwards to the next post, as this will cause the system to sag and go out of shape.

The system should be counter-tensioned at the end of each run using the screw-pin and plugs provided. To avoid the system from sagging do not use springs in the counter-tension wires.

Instructions and Technical Guide

PestFix Post & Wire System Technical Specification

PestFix Post & Wire System Technical Specification

15m Pigeon Post and Wire Kit For Masonry (PW257)51.20Each ex.VAT
30m Pigeon Post and Wire Kit For Masonry (PW258)74.81Each ex.VAT
60m Pigeon Post and Wire Kit For Masonry (PW259)120.45Each ex.VAT
90m Pigeon Post and Wire Kit For Masonry (PW260)165.21Each ex.VAT