Pigeon Stop LogoPowered by PestFixCall our Sales Team
+44 (0)1903 538 488
Monday - Friday   9am - 6pm
Your Basket
Your basket is empty.
Protected by
WelcomeInstallation ServicesInstallation GuidesSpecificationsTrade CustomersVATDeliveryReturnsPrivacyTerms and ConditionsContact Us
Search Products
Show All Products
Browse Products
Bird Stop
Pigeon Post and Wire Kits For Half Round Ridge Tiles
Pigeon Post and Wire Kits For Half Round Ridge Tiles
Pigeon Post and Wire Kits For Half Round Ridge Tiles
Pigeon Post and Wire Kits For Half Round Ridge Tiles
Pigeon Post and Wire Kits For Half Round Ridge Tiles
Click image to enlarge
  • Everything you need for a successful installation of our pigeon wire system on half round ridges
  • Stops pest Feral Pigeons from perching on ridge lines and fouling roof

  • Available in 15m or 30m kits based on 1.5m bracket spacings (max)
  • Kit contains brackets, wire and fixings, including tools
  • Click More Information for kit details

Specification

15m kit contains:

  • 1 x 6mm X 150mm Masonry Drill Bit - Straight Shank (NT128)
  • 75 x Bird Wire Nickel Crimp (PW208)
  • 1 x Disposable Priming Glue Brush (BS335)
  • 2 x Fix All High Tack Crystal Adhesive - 290ml - Clear (BS337)
  • 11 x Pigeon Wire Half-Round Ridge Bracket 150mm (PW213)
  • 1 x 50m Pigeon Wire Reel (PW200)
  • 33 x Pigeon Wire Standard Spring (PW207)
  • 2 x Red Wall Plugs (NF146)
  • 2 x Stainless Steel Screw Pins (PW211)
  • 1 x Surface Activator 1000ml (BS365)

30m kit contains:

  • 1 x 6mm X 150mm Masonry Drill Bit - Straight Shank (NT128)
  • 140 x Bird Wire Nickel Crimp (PW208)
  • 1 x Disposable Priming Glue Brush (BS335)
  • 4 x Fix All High Tack Crystal Adhesive - 290ml - Clear (BS337)
  • 21 x Pigeon Wire Half-Round Ridge Bracket 150mm (PW213)
  • 1 x 50m Pigeon Wire Reel (PW200)
  • 63 x Pigeon Wire Standard Spring (PW207)
  • 2 x Red Wall Plugs (NF146)
  • 2 x Stainless Steel Screw Pins (PW211)
  • 1 x Surface Activator 1000ml (BS365)

Usage

For Use in protecting half-round roof ridges from perching feral pigeons and preventing the roof from being affected by bird droppings.

Use as a low-profile alternative to bird spikes on low pressure bird infestations.

Brackets can be fixed to ridges in three different ways.

  • Bonding, preferred method, strongest (remove legs)
  • Mechanical Fix using screws in the holes provided, (remove legs) requires drilling of the ridge tile
  • Clamping using the legs of the bracket to clamp under the ridge tile, may require digging-out of mortar

1. Install brackets at no more than 1.5m centres

2. Install counter tension wires and screw pin anchor at each end of the ridge line without springs.

3. Run wires, stopping and starting at each bracket with a crimp and spring (do not run wires through the bracket)

4. Ensure wires are under load from the springs, but do not over-stretch the spring, leave some spring travel for when birds attempt to land.

15m Pigeon Post and Wire Kit For Half-Round Ridge Tiles (PW275)149.09Each ex.VAT
30m Pigeon Post and Wire Kit For Half-Round Ridge Tiles (PW276)286.66Each ex.VAT