Pigeon Stop LogoPowered by PestFixCall our Sales Team
+44 (0)1903 538 488
Monday - Friday   9am - 6pm
Your Basket
Your basket is empty.
Protected by
WelcomeInstallation ServicesInstallation GuidesSpecificationsTrade CustomersVATDeliveryReturnsPrivacyTerms and ConditionsContact Us
Search Products
Show All Products
Browse Products
Bird Stop
Nickel Plated Crimp For Pigeon Wire Termination
Nickel Plated Crimp For Pigeon Wire Termination
Nickel Plated Crimp For Pigeon Wire Termination
Nickel Plated Crimp For Pigeon Wire Termination
Nickel Plated Crimp For Pigeon Wire Termination
Click image to enlarge
  • For use in terminating pigeon wire against posts, split pins and screw pins
  • Use with a bird crimp tool
  • Gives a slip-free wire termination against which spring tension can be installed
  • Not compatible with seagull wire

Specification

Nickle plated crimp ferrule suitable for pigeon wire 0.45mm coated to 0.7mm diameter.

Usage

Nickle Plated Crimps are used to anchor the pigeon wire to the posts, springs, split pins or screw pins.

  • Thread one crimp onto the wire.
  • Thread the wire through the eye of the bird post or the spring, split pin or screw pin.
  • Feed the wire back through the crimp, forming a loop that contains the bird post or spring.
  • Slide the crimp towards the post or spring for a snug, neat fit, leaving a small tail of approx 10-20mm.
  • Compress the crimp using a Bird Wire crimp tool PW241 so that the two sections of wire are compressed together and held fast.

Quantity Discounts

5 +  4.4910 +  4.26
PW208 Nickel Plated Crimp For Pigeon Wire Termination4.73100 Pack ex.VAT
Similar Products
Bird Wire Combi Crimp and Cut Tool
From 20.99 Each
Pigeon Wire Reel
From 9.44 50m Reel