Pigeon Stop LogoPowered by PestFixCall our Sales Team
+44 (0)1903 538 488
Monday - Friday   9am - 6pm
Your Basket
Your basket is empty.
Protected by
WelcomeInstallation ServicesInstallation GuidesSpecificationsTrade CustomersVATDeliveryReturnsPrivacyTerms and ConditionsContact Us
Search Products
Show All Products
Browse Products
Bird Stop
Netting Capital Bracket
Netting Capital Bracket
Click image to enlarge
  • Used to prevent the net being damaged by any protruding features from a building or structure
  • Enables netting perimeter wire rope to be placed over the edges of parapets and ledges
  • 25 mm X 3mm stainless bracket in 200, 350 & 500mm lengths
  • Netting perimeter wire can run horizontally or vertically through the bracket
  • The bracket contains either two three or four 8mm diameter fixing holes


Grade 304 stainless steel 3mm plate 25mm wide by either 200mm, 350mm or 500mm in length. First fixing hole is 50mm in from end of bracket then at 60mm centres. Twist at end starts 50mm from end of bracket Fixing and guide hole all 8mm in diameter


Used for retaining netting wire rope perimeter frameworks on the outside edge of parapets or ledges without having to drill too close to the edge of the substrate, which would cause damage.

Also used to stand netting clear of any architectural features to prevent damage from chaffing. or to allow windows to open behind nets without touching the net.

Especially useful when folding netting over features to prevent wear through chaffing such as cornicing, parapets and ledges.

Netting Capital Bracket 200mm - Stainless Steel (NF305-200)3.99Each ex.VAT
Netting Capital Bracket 350mm - Stainless Steel (NF305-350)4.99Each ex.VAT
Netting Capital Bracket 500mm - Stainless Steel (NF305-500)5.99Each ex.VAT
Similar Products
Red Wall Plugs x 100
From 1.06 100 Pack
Dome Head No.8 Pozi Drive General Purpose Fixing Screws
From 3.56 100 Pack