Pigeon Stop LogoPowered by PestFixCall our Sales Team
+44 (0)1903 538 488
Monday - Friday   9am - 6pm
Your Basket
Your basket is empty.
Protected by
WelcomeInstallation ServicesInstallation GuidesSpecificationsTrade CustomersVATDeliveryReturnsPrivacyTerms and ConditionsContact Us
Search Products
Show All Products »
Browse Products
Bird Stop
Fix ALL High Tack SMX Hybrid Polymer Adhesive - Grey - Soudal
Fix ALL High Tack SMX Hybrid Polymer Adhesive - Grey - Soudal
Fix ALL High Tack SMX Hybrid Polymer Adhesive - Grey - Soudal
Click image to enlarge
  • High initial grab that enables it to be used on stonework and brickwork that has not fully dried after rainfall.
  • Use on porous or non-porous surfaces
  • Super strong adhesive, fast curing even at low temperatures
  • Extremely durable, neutral cure, weatherproof and waterproof adhesive
  • Case deal, buy 10 get 2 FREE


Fix All High Tack is a high quality, single component joint sealant with high adhesive strength. It is based on SMX® Hybrid Polymer technology.

  • High initial tack reducing the need for initial support.
  • Fast curing, quick build-up of end strength, high sheer strength after full cure (no primer)
  • Easy to apply and easy to tool and finish
  • Remains elastic after curing
  • No odour
  • Does not contain isocyanates, silicones nor solvents
  • Paintable with all water based paints
  • Good colour stability, weather and UV resistance
  • Good adhesion on wet substrates

Joint dimensions:

  • Minimal width: 2mm (bonding) 5mm (joints)
  • Maximal width: 10mm (bonding) 30mm (joints)
  • Minimum depth: 5mm (joints)

Recommendation: width of joint = 2x depth of joint


  • Method: Manual- or pneumatic caulking gun
  • Application temperature: +5°C until +35°C
  • Cleaning: Fix ALL Cleaner immediately after application and before curing
  • Tooling: with soapy solution before skin formation
  • Repair with: Fix ALL High tack

Fix ALL High Tack may be painted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase.

Fix ALL High Tack can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, polycarbonate, etc… may differ from manufacturer to manufacturer, we recommend preliminary compatibility tests.

While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding. For optimum adhesion the use of Surface Activator is recommended.

This product can not be used as a glazing sealant.

Fix ALL High Tack can be used for bonding of natural stone, but it cannot be used as a joint sealant on this type of surface. Fix ALL High Tack can therefore only be used on the bottom of natural stone tiles.

When applying, make sure not to spill any sealant on the surface of materials


Bonding of:
  • Bird Control Spikes
  • Daddi Long Legs Bird Spider bases
  • Post & wire Surface Mount Bases
  • Post & wire ridge brackets
  • Bird Netting Surface Mount Bases
  • Rodent bait station anchor points

Plus an immeasurable amount of other general purpose bonding and sealing applications

Instructions and Technical Guide

Technical Data Sheet

Technical Data Sheet

Fix All High Tack SMX Hybrid Polymer Adhesive - Grey (BS329)£6.72 290ml ex.VAT
Fix All High Tack SMX Hybrid Polymer Adhesive - Grey - Buy 10 Get 2 Extra FREE (BS329-CASE)£67.20Case of 12 ex.VAT
Similar Products
Adhesive Caulking Frame Gun
From £3.26 Each
Disposable Priming Glue Brush
From £0.78 Each
Surface Activator 500ml
From £14.52 500ml
Surface Cleaner 500ml
From £6.29 500ml