Pigeon Stop LogoPowered by PestFixCall our Sales Team
+44 (0)1903 538 488
Monday - Friday   9am - 6pm
Your Basket
Your basket is empty.
Protected by
WelcomeInstallation ServicesInstallation GuidesSpecificationsTrade CustomersVATDeliveryReturnsPrivacyTerms and ConditionsContact Us
Search Products
Show All Products
Browse Products
Bird Stop
Counter Tension Clamp 20mm - Stainless Steel
Counter Tension Clamp 20mm - Stainless Steel
Counter Tension Clamp 20mm - Stainless Steel
Click image to enlarge
  • Stainless steel counter tension anchor clamp with 20mm jaw size.
  • Anchor-point for counter-tensioning post & wire systems mounted on gutters & steelwork.
  • Max gutter / flange thickness 20mm.
  • Requires a 10mm spanner to tighten nut.
  • Use one clamp at each end of a run of post and wire to prevent posts leaning inwards.

Specification

Stainless steel 20mm clamp with a 10mm bolt head clamp

Usage

Stainless steel counter tension clamps for post and wire systems are used for providing a counter-tension anchor point on gutter lines and structural steelwork, on to which the post and wire system is terminated.

The wire that runs down to the clamp from the initial and final post head in the run of wire should not be sprung, but instead be fixed to provide a rigid counter tension effect against the spring tension in the system.

The use of counter tension anchors in post and wire systems is essential to prevent the posts leaning inwards against the spring pressure.

PW289 Counter Tension Clamp 20mm - Stainless Steel15.4310 Pack ex.VAT
Similar Products
Pigeon Posts for Gutters
From 52.49 10 Pack
Pigeon Posts for Steelwork
From 52.49 10 Pack